Skip to content
Black Friday · Up to 76% offLifetime deal:pay once, use it forever. The price goes up as licences sell.✓ 7-day refund on monthly, yearly and lifetime plansGet lifetime access
Regulation

FSANZ + Health Star: Australia nutrition label

FSANZ + Health Star, the Australian nutrition label under FSANZ Code Standard 1.2.7 (Nutrition, health and related claims) + Standard 1.2.8 (Nutrition information requirements), 7 mandatory nutrients, per 100 g or 100 ml and per serving, both columns required, English on pack. Generate a compliant label free.

Reviewed against FSANZ Code Standard 1.2.7 (Nutrition, health and related claims) + Standard 1.2.8 (Nutrition information requirements) · Page updated October 25, 2026

Jurisdiction
Australia + New Zealand (Food Standards Australia New Zealand)
Regulation
FSANZ Code Standard 1.2.7 (Nutrition, health and related claims) + Standard 1.2.8 (Nutrition information requirements)
Effective
HSR launched June 2014; NIP requirements ongoing
Generate a Australia labelAustralia & NZ guide

Nutrition labelling requirements in Australia

Packaged food sold in Australia must carry a nutrition declaration under FSANZ Code Standard 1.2.7 (Nutrition, health and related claims) + Standard 1.2.8 (Nutrition information requirements). This page covers the Australia / NZ - FSANZ + Health Star format: Dual per-serving + per-100g NIP with HSR panel. A compliant Australian nutrition label declares 7 mandatory nutrients: energy, protein, fat, total, - saturated, carbohydrate, - sugars and sodium. Values are declared per 100 g or 100 ml and per serving, both columns required, with energy in kJ, and sodium rather than salt. The panel is headed "Nutrition Information". English is required on pack. The scheme is voluntary, so it is not required on pack. NutritionFactLabel builds a print-ready Australian nutrition label from your recipe, applying the rounding rules and reference intakes for Australia automatically, and exports it as PDF, PNG, SVG, JPG or EPS.

Official regulation

Citation
FSANZ Code Standard 1.2.7 (Nutrition, health and related claims) + Standard 1.2.8 (Nutrition information requirements)
Effective
HSR launched June 2014; NIP requirements ongoing
Scope
Australia + New Zealand (Food Standards Australia New Zealand)
Source

Key facts

FOP system
Health Star Rating (HSR): 0.5 to 5 stars, voluntary
Format
Dual column: per-serving AND per-100g/100mL
Sodium threshold
Sodium ≥ 600 mg/100g gets a "high" claim risk flag

Front-of-pack scheme: how it works in Australia

Scheme type
star rating

When an Australia nutrition information panel is mandatory

A Nutrition Information Panel, or NIP, is mandatory on packaged food that must carry a label under the Australia New Zealand Food Standards Code. Standard 1.2.8 sets these nutrition information requirements, which are in force in both Australia and New Zealand.

Standard 1.2.8 exempts some foods from the NIP unless a claim that needs nutrition information is made. The exemptions include standardised alcoholic beverages, herbs and spices, herbal infusions, vinegar, salt and salt substitutes, tea and coffee, approved food additives and processing aids, single-ingredient fruit, vegetables, meat, poultry and fish, water and ice, prepared filled rolls and sandwiches, and kava.

Food in a small package is also exempt from the normal NIP, except food for infants.

The exemptions fall away when a claim is made. If an otherwise exempt food carries a nutrition content claim or a health claim, the nutrition information requirements for that claim become mandatory.

Source: Australia New Zealand Food Standards Code, Standard 1.2.8.

FSANZ nutrition information panel content and format

A standard FSANZ nutrition information panel must state the number of servings in the package and the average quantity of food in one serving: grams for solid or semi-solid food, millilitres for beverages and other liquids. This is mandatory and in force.

For both one serving and the unit quantity (100 g for solid or semi-solid food, 100 mL for liquids), the panel must declare:

  • energy, in kilojoules, or in both kilojoules and kilocalories;
  • protein;
  • fat;
  • saturated fat, subject to the exceptions in Standard 1.2.8;
  • carbohydrate;
  • sugars;
  • sodium; and
  • any other nutrient or substance that a claim makes it necessary to declare.

The panel must use the format prescribed in Schedule 12 unless another provision of the Code specifies a different one. The standard Australian nutrition information panel template sets out the quantity per serving next to the quantity per 100 g or 100 mL.

Some claims make extra declarations mandatory. For example, a claim about lactose requires galactose to be declared, a claim about salt or sodium requires potassium to be declared, and an omega-3 claim requires the omega-3 fatty acid declarations set out in Standard 1.2.8.

Source: Australia New Zealand Food Standards Code, Standard 1.2.8 and Schedule 12.

Australia nutrition label rounding and expression rules

Energy and the average, minimum or maximum quantities of nutrients in the NIP must be expressed to no more than 3 significant figures. This is mandatory and in force, and it is the main numerical rule to build into any nutrition information panel generator for Australia.

Some low values may be stated as "less than" figures, which is voluntary:

  • energy below 40 kJ per serving or per 100 g or 100 mL may be shown as "LESS THAN 40 kJ";
  • protein, fat, a class of fatty acids, carbohydrate, sugars or dietary fibre below 1 g may be shown as "LESS THAN 1 g"; and
  • sodium or potassium below 5 mg may be shown as "LESS THAN 5 mg".

The panel must make clear whether the values are average, minimum or maximum quantities. Dietary fibre, when declared, must be measured by the method Schedule 11 requires.

Source: Australia New Zealand Food Standards Code, Standard 1.2.8.

Health Star Rating calculation and front-of-pack use

The Health Star Rating, or HSR, is a voluntary front-of-pack labelling system in force in Australia and New Zealand. It rates the overall nutritional profile of eligible packaged food from 0.5 to 5 stars and is meant mainly for comparing similar products.

For most products, the HSR calculation starts with baseline points for energy, saturated fat, total sugars and sodium. These are offset by modifying points for fruit, vegetable, nut and legume content, protein and fibre, depending on the product category and its eligibility rules.

The calculation uses values per 100 g or 100 mL. The food must first be assigned to the correct HSR category; the modifying points are then subtracted from the baseline points, and the result is converted to a star rating with the HSR rating criteria.

The HSR graphic is intended mainly for packaged foods that must carry a NIP and that vary in nutrient composition. The Implementation Guide also lists foods that may not display the graphic.

Source: Health Star Rating System Implementation Guide; Health Star Rating System, How ratings are calculated.

Is the Health Star Rating mandatory under Australia food labeling regulations?

The Health Star Rating is voluntary for now. Manufacturers and retailers are not currently required to put an HSR on eligible food.

Making it mandatory is proposed. In February 2026, after voluntary uptake targets were not met, the Food Ministers' Meeting asked FSANZ to assess mandating the system. FSANZ published Proposal P1067 on 21 April 2026 and ran a first call for submissions from 7 May to 5 July 2026, with a second round of consultation planned.

The proposal does not itself make the HSR mandatory. If mandatory rules are adopted, transitional arrangements are expected to be set as part of that process.

A business that displays an HSR now must calculate it and apply the graphic in line with the current Implementation Guide and calculator.

Source: FSANZ, P1067 Health Star Rating System; Health Star Rating System, Proposal on mandating the HSR system.

How NutritionFactLabel handles it

  • Applies the correct rounding rules for every nutrient
  • Uses the right Daily Value / Reference Intake table for this jurisdiction
  • Renders the required front-of-pack warnings automatically when thresholds are hit
  • Handles multilingual labels where required (bilingual EN/FR, EN/ES, Arabic + EN, etc.)
  • Exports print-ready vector PDF, PNG, SVG, JPG, and EPS

Common questions

What is a Nutrition Information Panel?
A Nutrition Information Panel is the mandatory nutrition declaration for packaged foods under Standard 1.2.8. It gives values per serving and per 100 g or 100 mL for energy, protein, fat, saturated fat, carbohydrate, sugars and sodium, plus anything else a claim makes necessary.
When is a NIP required?
A NIP is mandatory on packaged food covered by the Code's labelling rules. Standard 1.2.8 lists exemptions, such as herbs and spices, tea and coffee and single-ingredient fresh produce, but an exempt food must provide nutrition information if it makes a claim that needs it.
What is the Health Star Rating?
The Health Star Rating is a voluntary front-of-pack system that rates eligible foods from 0.5 to 5 stars on their overall nutritional profile. It is designed for comparing similar foods, not foods from unrelated categories.
How is the HSR calculated?
The calculation uses values per 100 g or 100 mL. Baseline points for energy, saturated fat, total sugars and sodium are offset by modifying points for fruit, vegetable, nut and legume content, protein and fibre, and the result is converted to a star rating according to the food's HSR category.
Is the Health Star Rating mandatory?
No, it is voluntary for now. Making it mandatory is proposed: FSANZ opened Proposal P1067 in April 2026 after a request from food ministers, but the proposal has not yet changed the voluntary system.
What are the Australia nutrition label rounding rules?
Energy and nutrient values in the NIP must be expressed to no more than 3 significant figures, which is mandatory. The Code also allows voluntary "less than" declarations, such as "LESS THAN 1 g" for specified nutrients below 1 g and "LESS THAN 5 mg" for sodium or potassium below 5 mg.
Does an Australian NIP show values per serving or per 100 g?
Both, which is mandatory. The panel gives the quantity per serving and per 100 g for solid or semi-solid food, or per 100 mL for liquids, along with the number of servings per package and the average serving size.

How to generate one

  • Open the generator: free account, no credit card
  • Pick "Australia / NZ - FSANZ + Health Star" from the format rail
  • Enter your ingredients (search USDA FoodData Central or add a custom ingredient)
  • The label renders live; export in one click

Generate a compliant Australian nutrition label in minutes

Free forever. No card. 3 saved recipes on the free plan.