Skip to content
Black Friday · Up to 76% offLifetime deal:pay once, use it forever. The price goes up as licences sell.✓ 7-day refund on monthly, yearly and lifetime plansGet lifetime access

Plastic Resin Food Safety Guide

The free Plastic Resin Food Safety Guide explains the seven resin identification codes on plastic packaging, from 1 (PETE) to 7 (other). For each resin it shows whether it is suitable for food contact, its FDA status, its temperature range, typical food uses, cautions and how widely it is recycled. It is a reference, not a migration test.

Quick Lookup by Resin Code

#1

PETE: Polyethylene Terephthalate

Service temp: -40°F to 120°F

Food SafeFDA Approved

Common Uses

  • •Water bottles
  • •Soda bottles
  • •Peanut butter jars
  • •Salad dressing containers
  • •Cooking oil bottles

Properties

  • Clear and transparent
  • Lightweight yet strong
  • Good moisture barrier
  • Recyclable (#1)

Cautions

  • Not recommended for repeated use
  • Can leach antimony at high temperatures
  • Single-use preferred
Recycling: Widely accepted curbside. Recycled into fiber, carpet, new containers.
#2

HDPE: High-Density Polyethylene

Service temp: -148°F to 176°F

Food SafeFDA Approved

Common Uses

  • •Milk jugs
  • •Juice containers
  • •Cereal box liners
  • •Grocery bags
  • •Butter tubs
  • •Detergent bottles

Properties

  • Opaque or translucent
  • Stiff and strong
  • Excellent chemical resistance
  • Good moisture barrier
  • Recyclable (#2)

Cautions

  • Generally considered very safe
  • Low risk of leaching
Recycling: Widely accepted. Recycled into lumber, playground equipment, pipes.
#3

PVC: Polyvinyl Chloride

Service temp: -4°F to 140°F

Not Food Safe

Common Uses

  • •Cling wrap (some types)
  • •Blister packs
  • •Cooking oil bottles (some)
  • •Plumbing pipes
  • •Window frames

Properties

  • Flexible or rigid forms
  • Resistant to chemicals
  • Durable
  • Rarely recycled (#3)

Cautions

  • Contains phthalates (plasticizers)
  • Can leach chlorine and dioxins
  • NOT recommended for food contact
  • Avoid heating
Recycling: Rarely recycled. Difficult to process safely.
#4

LDPE: Low-Density Polyethylene

Service temp: -58°F to 176°F

Food SafeFDA Approved

Common Uses

  • •Bread bags
  • •Squeezable bottles
  • •Frozen food bags
  • •Flexible container lids
  • •Produce bags

Properties

  • Flexible and soft
  • Transparent to translucent
  • Good moisture barrier
  • Chemically resistant
  • Recyclable (#4)

Cautions

  • Generally considered safe
  • Low risk of leaching
  • Not for high-heat applications
Recycling: Check locally. Recycled into trash can liners, furniture, floor tiles.
#5

PP: Polypropylene

Service temp: -4°F to 275°F

Food SafeFDA Approved

Common Uses

  • •Yogurt cups
  • •Deli containers
  • •Syrup bottles
  • •Ketchup bottles
  • •Medicine bottles
  • •Microwave containers
  • •Bottle caps

Properties

  • Heat resistant
  • Semi-transparent
  • Strong and durable
  • Microwave safe
  • Good chemical resistance
  • Recyclable (#5)

Cautions

  • Considered one of the safest plastics
  • Withstands microwave and dishwasher temperatures
Recycling: Increasingly accepted. Recycled into auto parts, brushes, battery cases.
#6

PS: Polystyrene

Service temp: -4°F to 170°F

Not Food Safe

Common Uses

  • •Styrofoam cups
  • •Takeout containers
  • •Egg cartons
  • •Disposable plates/cutlery
  • •Packing peanuts

Properties

  • Lightweight
  • Insulating
  • Can be rigid or foam
  • Brittle
  • Rarely recycled (#6)

Cautions

  • Can leach styrene (possible carcinogen)
  • Avoid hot foods and liquids
  • NOT recommended for food reheating
  • Being banned in many jurisdictions
Recycling: Rarely recycled. Many municipalities ban foam PS.
#7

OTHER: Other (BPA, Polycarbonate, PLA, etc.)

Temperature range varies by specific resin

Varies

Common Uses

  • •Baby bottles (older)
  • •Water cooler jugs
  • •3/5-gallon reusable water bottles
  • •Nylon food packaging
  • •Compostable PLA containers

Properties

  • Catch-all category
  • Includes many different plastics
  • Properties vary widely

Cautions

  • May contain BPA (bisphenol A)
  • Verify specific resin type before food use
  • PLA (plant-based) is generally safe
  • Polycarbonate should be avoided for food
Recycling: Rarely recycled. Check specific resin type.

At-a-Glance Comparison

CodeResinFood SafeFDAMax TempRecyclable
#1 PETEPolyethylene TerephthalateYesYes120°FYes
#2 HDPEHigh-Density PolyethyleneYesYes176°FYes
#3 PVCPolyvinyl ChlorideNoNo140°FRarely
#4 LDPELow-Density PolyethyleneYesYes176°FLimited
#5 PPPolypropyleneYesYes275°FYes
#6 PSPolystyreneNoNo170°FRarely
#7 OTHEROther (BPA, Polycarbonate, PLA, etc.)VariesVariesVariesRarely

Packaging Safety Tips

Prefer #1, #2, #4, #5

These resins are FDA-approved for food contact and have the lowest leaching risk.

Avoid #3 (PVC) and #6 (PS)

Both can leach harmful chemicals, especially when heated. Not recommended for food packaging.

Check #7 carefully

This catch-all category includes both safe (PLA) and unsafe (BPA polycarbonate) plastics.

Mind the temperature

Each resin has a max service temperature. Exceeding it increases leaching risk significantly.

FDA vs. food-safe

FDA approval means the resin CAN be used for food. The specific product must also be manufactured to food-grade standards.

Single-use caution

Some food-safe plastics (#1 PETE) are designed for single use. Repeated use may degrade the material.

How plastic resin codes work

A code for sorting, not a safety mark

The number moulded into the base of a plastic item is a Resin Identification Code, standardised in ASTM D7611. It names the polymer family so that the item can be sorted: 1 polyethylene terephthalate (PETE), 2 high-density polyethylene, 3 polyvinyl chloride, 4 low-density polyethylene, 5 polypropylene, 6 polystyrene, and 7 for everything else.

The current standard prints the code inside a solid triangle rather than the chasing-arrows loop, because the arrows were widely read as a promise of recyclability. Neither version says whether the item is recycled where you live, and neither says whether it is suitable for food.

How to read the cards

Each code has a card listing common uses, material properties, cautions, a recycling note and a service temperature range. The header colour is the tool's overall food-contact assessment: green for codes 1, 2, 4 and 5, red for 3 and 6, and amber for 7, where the answer depends on which plastic it actually is. The comparison table puts the maximum temperatures and recyclability side by side.

The service ranges the tool gives are:

  • PET: -40 to 120 °F
  • HDPE: -148 to 176 °F
  • PVC: -4 to 140 °F
  • LDPE: -58 to 176 °F
  • PP: -4 to 275 °F
  • PS: -4 to 170 °F

Code 7 has no single range, because it is not a single material.

Temperature decides more than the code

For a food business the practical question is usually heat - hot filling, microwave reheating, dishwasher reuse - or deep cold. Polypropylene has by far the highest upper figure in the table, which is why it dominates microwaveable tubs and deli containers. PET's upper figure of 120 °F sits well below the temperature of freshly cooked food, and the tool notes that PET can leach antimony at high temperatures and is intended for single use.

A temperature rating belongs to the specific item, not to the resin family. The same polymer is made in grades designed for different duties, so check the conditions the supplier states for the exact container rather than relying on the row for its resin.

Why 3, 6 and 7 need a closer look

The tool flags PVC (#3) as not recommended for food contact, citing phthalate plasticisers and the risk of leaching, particularly when heated. It flags polystyrene (#6) for possible styrene migration, advises keeping it away from hot food and reheating, and notes that foam polystyrene is banned in many jurisdictions.

Code 7 includes polycarbonate, which may contain bisphenol A and which the tool advises avoiding for food, and also PLA, the plant-based material used for compostable containers, which it treats as generally safe. Two items stamped 7 can sit at opposite ends of the scale, and the only way to tell them apart is to find out which resin each one actually is.

What to ask your packaging supplier

The colour badges summarise caution; they are not a regulatory clearance. Whether a container may hold your food depends on its formulation and on the food-contact rules of the market you sell in. Before committing to a container, get in writing:

  • that the item complies with the food-contact requirements of your market
  • the conditions that compliance covers - temperature, the type of food (fatty, acidic, alcoholic), and single or repeated use
  • the actual polymer, if the item is coded 7

Keep that statement with the packaging specification, so a later change of container shows up as a change. A recyclability statement printed on your own pack is a separate claim from the resin code and needs its own support.

For what the finished pack must say, run the FDA Label Checklist, see how storage affects dates with the Shelf Life Calculator, and read the FDA food labeling requirements.

Reference information, not legal advice. Requirements change and turn on facts specific to your product - confirm against the current regulation before relying on it.

Common questions

What do the numbers 1 to 7 on plastic mean?

They are Resin Identification Codes, standardised in ASTM D7611. They identify the polymer for sorting and recycling: 1 PET, 2 HDPE, 3 PVC, 4 LDPE, 5 PP, 6 PS and 7 for everything else. The code is an identification system, not a safety rating and not a statement that the item is recyclable in your area.

Does the code tell me if a container is food safe?

No. Food-contact suitability comes from the specific formulation and its clearance for food contact use, not from the resin family. Two containers with the same code can differ in additives, colourants and intended use. The supplier declaration for that specific item is the evidence, not the triangle on the base.

Can I put hot food in any of these?

Not without checking, and temperature is where resin choice matters most. Polypropylene (5) is the usual choice for microwave and hot-fill containers, but only within the conditions the supplier states for that specific item; PET (1), PS (6) and PVC (3) should not be used with hot food. Each polymer has its own service temperature range, and exceeding it can deform the container or increase migration. Check the temperature rating for the actual item, including whether it is rated for microwave, hot fill, retort or freezer use, which are all different questions.

Is reusing a container safe?

It depends on the item and how it was made. Single-use packaging is designed and cleared for one use: repeated washing can craze the surface, and a scratched surface is harder to clean properly. Containers intended for reuse are specified for it. The general answer is that the original clearance covers the original intended use.