Skip to content
Black Friday · Up to 76% offLifetime deal:pay once, use it forever. The price goes up as licences sell.✓ 7-day refund on monthly, yearly and lifetime plansGet lifetime access
Regulation

Aggregate Display: FDA Nutrition Facts format

Combined product information. An FDA Nutrition Facts layout under 21 CFR 101.9, generated free with correct rounding and Daily Values.

Reviewed against 21 CFR 101.9 (Nutrition labeling of food) · Page updated November 4, 2026

Jurisdiction
United States (FDA-regulated packaged food)
Regulation
21 CFR 101.9 (Nutrition labeling of food)
Effective
Current; 2016 rule (81 FR 33742) fully in force since 1 January 2021
Official source
www.ecfr.gov
Generate this labelUS FDA requirements guide

Nutrition labelling requirements for Aggregate Display

Packaged food sold in the United States must carry a nutrition declaration under 21 CFR 101.9 (Nutrition labeling of food). This page covers the Aggregate Display format: Combined product information. A compliant nutrition label declares 15 mandatory nutrients: calories, total fat, saturated fat, trans fat, cholesterol, sodium, total carbohydrate, dietary fiber, total sugars, added sugars, protein, vitamin d, calcium, iron and potassium. Values are declared per serving, with serving sizes set by the racc tables in 21 cfr 101.12, with energy in kcal, and sodium rather than salt. The panel is headed "Nutrition Facts". English is required on pack. There is no mandatory front-of-pack warning scheme. NutritionFactLabel builds a print-ready nutrition label from your recipe, applying the rounding rules and reference intakes for the United States automatically, and exports it as PDF, PNG, SVG, JPG or EPS.

Official regulation

Citation
21 CFR 101.9 (Nutrition labeling of food)
Effective
Current; 2016 rule (81 FR 33742) fully in force since 1 January 2021
Scope
United States (FDA-regulated packaged food)
Source

Key facts

Mandatory nutrients (15)
Calories, Total Fat, Saturated Fat, Trans Fat, Cholesterol, Sodium, Total Carbohydrate, Dietary Fiber, Total Sugars, Added Sugars, Protein, Vitamin D, Calcium, Iron and Potassium
Declaration basis
Per serving, with serving sizes set by the RACC tables in 21 CFR 101.12
Energy units
kcal
Sodium or salt
Declared as sodium, not salt
Panel heading
Nutrition Facts
Label language
English required on pack
Front of pack
No mandatory front-of-pack warning scheme

FDA rounding rules under 21 CFR 101.9(c), and how this generator applies them

Every value on a US Nutrition Facts label is rounded before it is printed, and each nutrient has its own increments. The examples below are produced by this generator's own rounding code, so you can check its output against the rule.

NutrientRuleGenerator output
Calories
21 CFR 101.9(c)(1)
Under 5 Calories: may be declared as 0. 5 to 50: nearest 5. Above 50: nearest 10.4.9 → 0
47 → 45
52 → 50
137 → 140
Total fat, saturated fat, trans fat
21 CFR 101.9(c)(2)
Under 0.5 g: 0. Under 5 g: nearest 0.5 g. 5 g and above: nearest 1 g.0.4 g → 0 g
2.3 g → 2.5 g
4.8 g → 5 g
7.6 g → 8 g
Cholesterol
21 CFR 101.9(c)(3)
Under 2 mg: 0. 2 to 5 mg: "less than 5 mg". Above 5 mg: nearest 5 mg.1.5 mg → 0 mg
3 mg → "less than 5 mg"
23 mg → 25 mg
Sodium
21 CFR 101.9(c)(4)
Under 5 mg: 0. 5 to 140 mg: nearest 5 mg. Above 140 mg: nearest 10 mg.4 mg → 0 mg
72 mg → 70 mg
143 mg → 140 mg
1236 mg → 1240 mg
Total carbohydrate, dietary fiber, total sugars, added sugars
21 CFR 101.9(c)(6)
Under 0.5 g: 0. Under 1 g: "less than 1 g" (or 0). 1 g and above: nearest 1 g.0.3 g → 0 g
0.7 g → "less than 1 g"
12.6 g → 13 g
Protein
21 CFR 101.9(c)(7)
Under 0.5 g: 0. Under 1 g: "less than 1 g" (or 0). 1 g and above: nearest 1 g.0.3 g → 0 g
0.7 g → "less than 1 g"
8.5 g → 9 g
% Daily Value, vitamins and minerals
21 CFR 101.9(c)(8)(iii)
Under 2% of the DV: may be declared as 0. Up to 10%: nearest 2%. Above 10% up to 50%: nearest 5%. Above 50%: nearest 10%.1.5% → 0%
6.6% → 6%
23% → 25%
57% → 60%

%Daily Value for fat, sodium, carbohydrate, fiber, added sugars and protein is shown to the nearest whole percent, as on FDA's published sample label.

Source: 21 CFR 101.9(c), eCFR. Supplement Facts panels follow 21 CFR 101.36 instead.

When to use the aggregate display Nutrition Facts label

The aggregate display is a voluntary FDA format, in force under 21 CFR 101.9(d)(13), that puts the nutrition information for several foods into one Nutrition Facts panel. It may be used on the outer label of a package holding two or more separately packaged foods that are meant to be eaten individually, such as a variety pack of cereals or snack foods.

The same provision allows it for packages used interchangeably for the same type of food. FDA's example is round ice cream containers, where one panel can cover several flavors.

Eligibility does not depend on package size or on a shortage of vertical space. It depends on what is in the package. That sets the aggregate display apart from the tabular and linear formats, which exist to solve space problems.

Source: 21 CFR 101.9(d)(13)(i), eCFR.

What 21 CFR 101.9 requires in an aggregate display

If a manufacturer chooses the aggregate display, its rules become mandatory. Under 21 CFR 101.9(d)(13)(ii), the panel must follow the general format in paragraph (d) to the maximum extent possible.

The identity of each food must appear immediately to the right of the "Nutrition Facts" heading. Under each food's name, the quantitative amount by weight (in g, mg or mcg) and the percent Daily Value must be given in separate columns.

Each food keeps its own serving size and its own set of nutrient values. The aggregate display is a way of sharing one panel, not of averaging or combining the foods into a single set of numbers.

The aggregate display stays voluntary. A variety pack may instead carry a separate Nutrition Facts label for each food.

Source: 21 CFR 101.9(d)(13)(ii), eCFR.

Type size and layout rules for the aggregate display

Because the aggregate display follows paragraph (d) as far as possible, the general formatting rules in 21 CFR 101.9(d)(1) remain mandatory. The panel must be boxed with hairlines and use a single easy-to-read type style with upper and lower case letters, on a contrasting background.

The aggregate display has no reduced type sizes of its own. The mandatory minimums are the standard ones:

  • the word "Calories" at least 16 point and the calorie number at least 22 point, both bold or extra bold;
  • servings per container and "Serving size" at least 10 point, with serving size in bold or extra bold;
  • nutrient information covered by (d)(7) and (d)(8) at least 8 point; and
  • headings and footnote text at least 6 point.

The smaller sizes allowed for the tabular display and the small-package formats do not carry over to an aggregate panel.

Source: 21 CFR 101.9(d)(1)(iii) and (d)(13), eCFR.

Aggregate display versus dual-column and other FDA formats

Aggregate and dual-column labels both put several columns of numbers side by side, but they answer different questions. An aggregate display compares different foods in one package. Dual-column labeling compares two amounts or two forms of the same food, such as per serving and per container, or as packaged and as prepared under 21 CFR 101.9(e).

The tabular display under (d)(11) changes the shape of a single food's panel to fit a short package. The aggregate display does not depend on the package shape at all.

English is mandatory for required label information under 21 CFR 101.15(c), except for products distributed solely in Puerto Rico or another US territory where another language predominates. When nutrition labeling must also appear in a second language, 21 CFR 101.9 allows a separate panel for each language or one panel with the second language following the English, and numbers that are identical in both languages need not be repeated.

Source: 21 CFR 101.9 and 21 CFR 101.15, eCFR.

How NutritionFactLabel handles it

  • Applies the correct rounding rules for every nutrient
  • Uses the right Daily Value / Reference Intake table for this jurisdiction
  • Renders the required front-of-pack warnings automatically when thresholds are hit
  • Handles multilingual labels where required (bilingual EN/FR, EN/ES, Arabic + EN, etc.)
  • Exports print-ready vector PDF, PNG, SVG, JPG, and EPS

Common questions

When can the aggregate display Nutrition Facts format be used?
It is a voluntary option, in force under 21 CFR 101.9(d)(13), for an outer package containing two or more separately packaged foods meant to be eaten individually, such as a variety pack. It may also be used for packages used interchangeably for the same type of food, such as ice cream cartons in different flavors.
What does 21 CFR 101.9 require for an aggregate display?
The panel must follow the standard paragraph (d) format as far as possible. The name of each food must appear to the right of the "Nutrition Facts" heading, with each food's amounts and percent Daily Values in separate columns underneath.
How does an aggregate display differ from a standard vertical label?
A vertical label covers one food. An aggregate display covers several foods in one panel, with a set of columns for each food and each food keeping its own serving size.
Which products or package sizes qualify for the aggregate display?
Qualification depends on the package contents, not its size. Variety packs of individually packaged foods and interchangeable packages of the same type of food qualify.
What are the type size rules for an FDA aggregate display?
The standard mandatory minimums apply: 16 point for "Calories", 22 point for the calorie number, 10 point for servings and serving size, 8 point for nutrient information and 6 point for headings and footnotes. The reduced sizes for tabular and small-package formats do not apply.
Does a variety pack have to use one aggregate Nutrition Facts label?
No. The aggregate display is voluntary, and the manufacturer may give each food its own Nutrition Facts label instead. Once the aggregate format is chosen, its column and food identification rules are mandatory.

How to generate one

  • Open the generator: free account, no credit card
  • Pick "Aggregate Display" from the format rail
  • Enter your ingredients (search USDA FoodData Central or add a custom ingredient)
  • The label renders live; export in one click

Generate a compliant Aggregate Display label now

Free forever. No card. 3 saved recipes on the free plan.