Vertical with Micronutrients Side-by-Side: FDA Nutrition Facts format
Primary vertical + vitamins on right. An FDA Nutrition Facts layout under 21 CFR 101.9, generated free with correct rounding and Daily Values.
Reviewed against 21 CFR 101.9 (Nutrition labeling of food) · Page updated November 4, 2026
Nutrition labelling requirements for Vertical with Micronutrients Side-by-Side
Packaged food sold in the United States must carry a nutrition declaration under 21 CFR 101.9 (Nutrition labeling of food). This page covers the Vertical with Micronutrients Side-by-Side format: Primary vertical + vitamins on right. A compliant nutrition label declares 15 mandatory nutrients: calories, total fat, saturated fat, trans fat, cholesterol, sodium, total carbohydrate, dietary fiber, total sugars, added sugars, protein, vitamin d, calcium, iron and potassium. Values are declared per serving, with serving sizes set by the racc tables in 21 cfr 101.12, with energy in kcal, and sodium rather than salt. The panel is headed "Nutrition Facts". English is required on pack. There is no mandatory front-of-pack warning scheme. NutritionFactLabel builds a print-ready nutrition label from your recipe, applying the rounding rules and reference intakes for the United States automatically, and exports it as PDF, PNG, SVG, JPG or EPS.
Official regulation
Key facts
FDA rounding rules under 21 CFR 101.9(c), and how this generator applies them
Every value on a US Nutrition Facts label is rounded before it is printed, and each nutrient has its own increments. The examples below are produced by this generator's own rounding code, so you can check its output against the rule.
| Nutrient | Rule | Generator output |
|---|---|---|
| Calories 21 CFR 101.9(c)(1) | Under 5 Calories: may be declared as 0. 5 to 50: nearest 5. Above 50: nearest 10. | 4.9 → 0 47 → 45 52 → 50 137 → 140 |
| Total fat, saturated fat, trans fat 21 CFR 101.9(c)(2) | Under 0.5 g: 0. Under 5 g: nearest 0.5 g. 5 g and above: nearest 1 g. | 0.4 g → 0 g 2.3 g → 2.5 g 4.8 g → 5 g 7.6 g → 8 g |
| Cholesterol 21 CFR 101.9(c)(3) | Under 2 mg: 0. 2 to 5 mg: "less than 5 mg". Above 5 mg: nearest 5 mg. | 1.5 mg → 0 mg 3 mg → "less than 5 mg" 23 mg → 25 mg |
| Sodium 21 CFR 101.9(c)(4) | Under 5 mg: 0. 5 to 140 mg: nearest 5 mg. Above 140 mg: nearest 10 mg. | 4 mg → 0 mg 72 mg → 70 mg 143 mg → 140 mg 1236 mg → 1240 mg |
| Total carbohydrate, dietary fiber, total sugars, added sugars 21 CFR 101.9(c)(6) | Under 0.5 g: 0. Under 1 g: "less than 1 g" (or 0). 1 g and above: nearest 1 g. | 0.3 g → 0 g 0.7 g → "less than 1 g" 12.6 g → 13 g |
| Protein 21 CFR 101.9(c)(7) | Under 0.5 g: 0. Under 1 g: "less than 1 g" (or 0). 1 g and above: nearest 1 g. | 0.3 g → 0 g 0.7 g → "less than 1 g" 8.5 g → 9 g |
| % Daily Value, vitamins and minerals 21 CFR 101.9(c)(8)(iii) | Under 2% of the DV: may be declared as 0. Up to 10%: nearest 2%. Above 10% up to 50%: nearest 5%. Above 50%: nearest 10%. | 1.5% → 0% 6.6% → 6% 23% → 25% 57% → 60% |
%Daily Value for fat, sodium, carbohydrate, fiber, added sugars and protein is shown to the nearest whole percent, as on FDA's published sample label.
Source: 21 CFR 101.9(c), eCFR. Supplement Facts panels follow 21 CFR 101.36 instead.
When vitamins and minerals can be listed side by side on a Nutrition Facts label
FDA's rule in 21 CFR 101.9(d)(8), in force, lets vitamins and minerals other than sodium be listed either vertically or horizontally within the standard vertical Nutrition Facts panel. The horizontal, side-by-side presentation is voluntary.
When the four mandatory micronutrients are set out in two columns, vitamin D and calcium go on the first line and iron and potassium on the second. FDA's format examples call this layout the "Vertical Display with Micronutrients Listed Side-by-Side".
This is not a separate format with its own eligibility rules. Any food that uses the standard vertical panel may use it, and every other requirement of the vertical panel stays the same.
Source: 21 CFR 101.9(d)(8), eCFR, and FDA, Examples of Different Label Formats.
Side-by-side vitamins and minerals layout rules
The vitamin and mineral area must be separated from the nutrients above it by a bar, which is mandatory whichever arrangement is used. Inside that area, horizontal listing is the voluntary part.
Each micronutrient still shows its name, quantitative amount and percent Daily Value together. Putting them side by side saves height, which can help a vertical panel fit a package without moving to a tabular display.
If more than four vitamins and minerals are declared, the extra ones may be listed vertically, with their percentages under the "% Daily Value" column. The side-by-side choice does not change which vitamins or minerals are mandatory or voluntary under 21 CFR 101.9(c)(8).
Source: 21 CFR 101.9(c)(8) and (d)(8), eCFR.
Type size rules for the side-by-side micronutrient panel
Because this is still a standard vertical panel, the general type rules in 21 CFR 101.9(d)(1) are mandatory. Information covered by (d)(7) and (d)(8), including the vitamins and minerals, must be at least 8 point with at least 4 points of leading, and letters must not touch.
The rest of the panel keeps the standard minimums: "Calories" at least 16 point and the calorie number at least 22 point, both bold or extra bold, and "Serving size" at least 10 point in bold or extra bold, with the allowed reduction when it does not fit.
The panel must use one easy-to-read type style with upper and lower case letters, be boxed with hairlines, and be printed in black or one color on a white or neutral contrasting background whenever practical.
Source: 21 CFR 101.9(d)(1), eCFR.
Side-by-side micronutrients versus tabular and small-package formats
Listing the micronutrients side by side does not turn the label into a tabular display. The tabular display in 21 CFR 101.9(d)(11) is a different, in-force alternative for packages that lack about 3 inches of continuous vertical space, and it comes with its own reduced type sizes that the side-by-side panel cannot borrow.
The small-package formats in 21 CFR 101.9(j)(13) are also separate. They apply only to packages with 40 square inches or less available for labeling, whereas the side-by-side arrangement is an option within the ordinary vertical panel on any package.
English is mandatory for required label information under 21 CFR 101.15(c), except for products distributed solely in Puerto Rico or another US territory where another language predominates. If the label uses another language for any representation, all required information must also appear in that language.
Source: 21 CFR 101.9(d)(11) and (j)(13) and 21 CFR 101.15, eCFR.
Sources
Primary documents this page was written from, checked 2026-10-03.
How NutritionFactLabel handles it
- Applies the correct rounding rules for every nutrient
- Uses the right Daily Value / Reference Intake table for this jurisdiction
- Renders the required front-of-pack warnings automatically when thresholds are hit
- Handles multilingual labels where required (bilingual EN/FR, EN/ES, Arabic + EN, etc.)
- Exports print-ready vector PDF, PNG, SVG, JPG, and EPS
Deep dives
Common questions
Related formats
Free tools for this label
All 51 free tools, no signup required.
How to generate one
- Open the generator: free account, no credit card
- Pick "Vertical with Micronutrients Side-by-Side" from the format rail
- Enter your ingredients (search USDA FoodData Central or add a custom ingredient)
- The label renders live; export in one click