Skip to content
Black Friday · Up to 76% offLifetime deal:pay once, use it forever. The price goes up as licences sell.✓ 7-day refund on monthly, yearly and lifetime plansGet lifetime access

Liquid Volume to Weight Calculator

The free Liquid Volume to Weight Calculator converts a volume of liquid into its weight, or a weight into its volume, using the specific gravity at 20 °C of 25 common liquids such as water, milk, honey and oils, or a value you enter. Use it to check the net quantity on a food or beverage label.

Liquid Specific Gravities

Specific gravity at 20°C (68°F) relative to water. 1 mL of water = 1 gram.

LiquidSpecific Gravityg/mLlbs/gal
Water1.0001.0008.35
Whole Milk1.0301.0308.60
Skim Milk1.0351.0358.64
Heavy Cream0.9940.9948.29
Honey1.4201.42011.85
Maple Syrup1.3251.32511.06
Corn Syrup1.3801.38011.52
Olive Oil0.9130.9137.62
Vegetable Oil0.9200.9207.68
Coconut Oil (liquid)0.9240.9247.71
Canola Oil0.9150.9157.64
Soy Sauce1.1701.1709.76
Vinegar1.0061.0068.40
Apple Juice1.0451.0458.72
Orange Juice1.0451.0458.72
Tomato Juice1.0301.0308.60
Beer1.0101.0108.43
Wine0.9900.9908.26
Ethanol (pure)0.7890.7896.58
Glycerin1.2611.26110.52
Isopropyl Alcohol0.7860.7866.56
Acetone0.7840.7846.54
Gasoline0.7400.7406.18
Diesel0.8500.8507.09
Kerosene0.8100.8106.76

Converting liquid volume to weight

Specific gravity does the conversion

Volume and weight are linked by density, and specific gravity is density expressed relative to water. This tool uses values at 20 °C, where water is 1.000, and treats specific gravity numerically as grams per millilitre. Every conversion is then a single step: grams = millilitres × SG one way, millilitres = grams ÷ SG the other. Whatever unit you enter is first normalised to millilitres or grams, so the same factor applies whether you start in cups, quarts or kilograms.

The reference table covers 25 liquids, from water through dairy, syrups, oils, juices and alcohols. Honey sits at 1.420, corn syrup at 1.380, olive oil at 0.913 and pure ethanol at 0.789. The pounds-per-gallon column is SG × 8.345, the weight in pounds of one US gallon of water.

Why 1 mL = 1 g fails

The water assumption is the most common shortcut, and it is wrong for nearly everything a food business bottles. 500 mL of honey weighs about 710 g, not 500 g - an error of 42%. 500 mL of olive oil weighs about 457 g. The error runs in opposite directions for dense and light products, so it does not average out across a range.

It bites twice on a label. The fill weight set on the line has to deliver the declared quantity, and the nutrient calculation behind the panel works on mass, so a volume-based recipe converted with the wrong density puts every per-serving figure off by the same proportion.

Fluid ounces are not ounces

A fluid ounce is a volume - 29.5735 mL in US measure. An ounce is a weight - 28.3495 g. They share a name and nothing else. A 16 fl oz bottle holds about 473 mL; filled with olive oil it weighs about 432 g, or roughly 15.2 oz. Filled with honey, the same bottle weighs about 23.7 oz.

Mixing the two is a classic net-quantity error: a weight printed with "fl oz", or a volume printed as plain "oz". The tool keeps them in separate lists - fluid ounces appear only among the volume units, ounces only among the weight units - so the result always says which one you have.

How to read the result

Converting volume to weight returns the figure in grams, kilograms, ounces, pounds and milligrams at once. Converting weight to volume returns millilitres, litres, fluid ounces, cups, pints, quarts, gallons, teaspoons and tablespoons. The cup, pint, quart and gallon are US customary measures - a US cup is 236.588 mL and a US gallon 3,785.41 mL - so they will not match imperial measures.

If your product is not in the list, choose the custom option and enter a specific gravity you have measured. For a sauce, syrup or beverage of your own, weighing a known volume at a controlled temperature is the reliable way to get that number, and it is worth doing once per formulation rather than borrowing the nearest table entry.

Limits of a table value

Specific gravity changes with temperature - most liquids expand as they warm - and with composition. A syrup's density moves with its sugar content, milk with its fat, a juice with its dissolved solids. The table gives typical values at 20 °C; a hot-filled product, or the same product made to a different recipe, will differ.

Use table values for planning and first estimates. For the figures that go on the pack - fill targets and the net quantity declaration - use a density measured on your own product, then carry the result into the net weight calculator or straight into the label generator.

Related tools: the Unit Converter for plain unit changes and the Bucket Fill Calculator for container fill weights.

Reference information, not legal advice. Requirements change and turn on facts specific to your product - confirm against the current regulation before relying on it.

Common questions

Why can I not just use 1 ml = 1 g?

That holds for water at about 4 degrees Celsius and nothing else. Oil is roughly 0.92 g per ml, honey around 1.42, a sugar syrup somewhere between depending on Brix. On a 500 ml fill that assumption can be tens of grams out, which moves both your net weight declaration and every per-serving nutrient number.

What is specific gravity?

The density of a substance relative to water. A specific gravity of 1.42 means the liquid is 1.42 times as heavy as the same volume of water. Multiply volume in millilitres by specific gravity to get grams. It is temperature-dependent, so a figure measured hot and applied to a cold fill will be off.

Should my net contents be declared by weight or by volume?

Liquids are generally declared by fluid measure and solids by weight, with viscous or semi-solid products judged on how the product is customarily sold. Getting this wrong is a net-quantity violation rather than a nutrition one, and it is worth confirming for anything that pours slowly.

Does the nutrition panel use volume or weight?

The serving size is expressed in a household measure, which for a beverage is usually a volume, with the metric equivalent in parentheses. The underlying nutrient calculation is done on mass. That is why an accurate density figure matters even when the label reads in millilitres.